Can you use pavers as a base for a shed?

Pavers fit together tightly, allowing you to create a sturdy base for your shed. Plus, they are durable and relatively inexpensive letting you get top quality results without breaking the bank. Using a shed paver foundation ensures your new outbuilding is on a stable, level surface.

Can you put a shed on block paving?

If your shed has bearers (pressure treated pieces of wood attached to the bottom of the shed), you can place your shed directly on concrete or paving slabs. The bearers will help protect the shed from moisture damage and create space for air circulation. The concrete or paving slabs must be level.

How do you build a foundation for a shed with pavers?


  1. Prep the area for the pavers by digging out dirt from the area.
  2. Determine the depth needed to install the pavers, gravel, and sand.
  3. Spread the gravel evenly into the area.
  4. Add the sand over the gravel.
  5. Set the pavers over the sand.

How deep do foundations need to be for a brick shed?

The width of the foundation should be a minimum of 100mm wide each side of the wall and the top a minimum of 150mm below the ground. The depth of the foundations differ due to the ground conditions, if you have stone underneath then 300-600m will be sufficient.

Can I build a shed on paving stones?

The short answer to this is yes a paver foundation is an excellent alternative to concrete.

Can I build a shed out of bricks?

Can I Build a Brick Shed Myself? Using the guide above, it is entirely possible to build a brick shed as a DIY job. While it may take a little bit longer than if you were to hire a company to do it, you could save a lot of money by not having to pay the labour costs.

What’s the best base for a shed?

Gravel is the best shed foundation, especially for portable buildings that come with a wood floor. Concrete is the ideal foundation for a garage or a shed without a pre-built floor.