How compressed should rap vocals be?

I would suggest using a ratio of 6:1 or 7:1 depending on the vocal performance and vocal tone. You will want a release of about 160 ms and threshold of -15 to – 20. Your make-up gain will largely depend on your beat as that will make the vocals louder or quieter.

What are good compression settings for vocals?

A good place to start with pop vocals is a 5:1 ratio. Try a higher ratio (7:1, 8:1) for more heavily compressed vocals with minimal dynamic range, or a lower ratio (2:1, 3:1) for a more natural sound with some dynamics preserved.

How do you get clear rap vocals?

  1. Avoid audio clipping.
  2. Keep vocals tight with timing and clean reverb.
  3. Play with pitch and formant for a unique sound.
  4. Delay specific words to fill in the gaps.
  5. Chop it up to get a stutter edit.
  6. Flip and reverse tracks for smooth transitions.
  7. Use parallel compression to get a punchy sound.
  8. Start mixing rap and hip-hop.

How many compressors do you need for rap vocals?

One way to avoid smashing a rap vocal is by using serial compression. This means having more than one compressor in the chain, each just doing a few dB of gain reduction. Normally you’ll want to have one compressor early in the chain for catching peaks, and one down the line for glue.

How do I compress vocals like a pro?

Dial in some heavy compression (aim for 6 dB’s of gain reduction or more). Start with an attack time of 5ms and a release of 30ms and go from there. Bring up the new aux underneath the lead vocal until it starts to increase the volume of the vocal. As soon as you notice an increase in apparent volume, stop.

Do vocals always need compression?

For modern genres, they often need to be up front at all times. If not, your mix will suffer. One of the most effective tools at your disposal for crafting consistent vocals is compression. When combined with automation, compression can make your vocals sound loud, punchy, and modern.

When should you compress vocals?

As we are only trying to catch the louder peaks, a higher threshold is also needed. You don’t want to compress every word (like with tonal compression), you only want to compress the louder peaks. You still need to be careful not to compress the transients too much, as this will put the vocals further back in the mix.

Should rap vocals be mono or stereo?

If you are recording the vocals of one singer in a booth, then you should record in mono. However, if you are recording vocals of multiple singers and instruments, you should record in stereo. The terms mono and stereo are quite common in the sound recording industry.

Should you layer rap vocals?

If you’re making modern rap music than no, you don’t need a vocal double track for the main verses. This is because doing a vocal double is going to make your vocals sound muddy and outdated. If you’re double track is even a millisecond off, you’ll have slight alignment issues with the main vocal track.