By 5 min read

How do I enable TPM in CMD?

In the console tree, under Computer Configuration, expand Administrative Templates, and then expand System. Under System, click Trusted Platform Module Services. In the details pane, double-click Configure the list of blocked TPM commands. Click Enabled, and then click Show.

How do I initialize TPM?

Initialize the TPM

  1. Click Start, click All Programs, click Accessories, and then click Run.
  2. In the Open box, type tpm.
  3. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
  4. On the Action menu, click Initialize TPM to start the TPM Initialization Wizard.

Can you enable TPM from PowerShell?

Using PowerShell, you can get the TPM status, clear TPM, initialize TPM and do much more. A Trusted Platform Module is a microchip that is built into a computer to provide hardware-based security. The TPM is a chip that’s part of your computer’s motherboard.

How do I initialize BitLocker and TPM?

Follow the procedure on this article to prepare the TPM module prior to installing the Encryption Management for Microsoft BitLocker agent.

  1. Enable and activate the Trusted Platform Module (TPM) in BIOS.
  2. Turn on the TPM:
  3. Go to Control Panel > BitLocker Drive Encryption and make sure that BitLocker is off.

How do I check if TPM is enabled in CMD?

You can use the Command Prompt to look for TPM, too. Hit the Windows key and type: cmd and launch the Command Prompt as Administrator. Then copy and paste the following command and hit Enter….To know you have TPM installed, three values need to come back as TRUE:

  1. IsActivated.
  2. IsEnabled.
  3. IsOwned.

How do I enable TPM in Regedit?

At the command prompt, type regedit and press Enter. Navigate to HKEY_LOCAL_MACHINE \ SYSTEM \ Setup and create a new key called LabConfig. Under this key, create a new DWORD (32-bit) value called BypassTPMCheck and set its value to 1. Create another new DWORD (32-bit) value called BypassRAMCheck and set its value to 1.

How do I fix a TPM problem?

To clear the TPM

  1. Open the Windows Defender Security Center app.
  2. Select Device security.
  3. Select Security processor details.
  4. Select Security processor troubleshooting.
  5. Select Clear TPM.
  6. You will be prompted to restart the computer.
  7. After the PC restarts, your TPM will be automatically prepared for use by Windows.

How do you check if TPM is enable?

Enable TPM 2.0 on your PC

  1. Press [Windows Key] + R or select Start > Run.
  2. Type “tpm.msc” (do not use quotation marks) and choose OK. If you see a message saying a “Compatible TPM cannot be found,” your PC may have a TPM that is disabled.

How do I reset TPM in BIOS?

To Clear TPM:

  1. Boot computer using F2 into the BIOS setup mode.
  2. Locate the “Security” option on the left and expand.
  3. Locate the “TPM” option nested under the “Security” setting.
  4. To clear the TPM you must check the box saying: “Clear” to clear the TPM hard drive security encryption.

How do I fix TPM device not detected?

Is the TPM Device Not Detected? Here Are Solutions to Fix It! [MiniTool News]

  1. Fix 1: Check If TPM Is Enabled in BIOS. First, you need to check if the TPM is enabled in BIOS.
  2. Fix 2: Update BIOS or UEFI.
  3. Fix 3: Reinstall TPM Driver.
  4. Fix 4: Reset BIOS/CMOS.
  5. Final Words.