How do I reset my Haier washing machine?
Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.
How do you fix a Haier washing machine that won’t drain?
If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
How do I fix error 2 on my Haier washing machine?
Haier error E2 An E2 error on a Haier washing machine indicates a malfunction with the door. First, check if the door is properly closed. Make sure that there’s no laundry stuck between the washing machine and the door. If the washing machine is completely full, the drum may be overloaded.
How do you manually drain a Haier washing machine?
- Step 1 – Turn off the power.
- Step 2 – Locate the drain hose at the back of the washer.
- Step 3 – Prepare your bucket and drain hose.
- Step 4 – Check for and remove all clogs in the drain hose.
- Step 5 – Check for deeper clogs in the drain or beyond.
- Step 6 – Inspect the washer pump.
How do I fix FA error on my Haier washing machine?
1. Make sure that you unplug the washing machine. 2. After unplugging push and hold the power button to get rid of any residual power stored if any.
What does Error 2 mean on a washing machine?
This is an error message signaling the unit’s inability to drain properly within a time specified by the PCB software. Cause 1: blocked pump filter. Extract the pump filter and clean it. To get to the filter, open the filter access door at the machine’s bottom right corner. E2 Error displays on Samsung Washing Machine.
How do I fix the error E1 on my Haier washing machine?
Drain error, water can not drain fully within the required drain time (controlled by PCB software ). Solution: Remove and clean the pump filter. Check drain hose for blockage and proper installation.
How do I fix error E3 on my Haier washing machine?
The screen displays ”E3” with alarm. Reason 1: Is the laundry put unevenly in the washing machine? Solution: Redistribute the laundry evenly. Close the top lid and press the START/PAUSE button.
What would cause a washing machine not to drain and spin?
If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.