What is cassette lockring tool?
Designed for 12 spline 23.4mm diameter tool fittings – the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Made from heat treated alloy tool steel.
How do I know what kind of cassette to get for my bike?
If you have external gears, stand behind your bike and take a look at the right side of the rear wheel. There should be a cluster of gears on the right-hand side. This is your cassette. Count the number of gears (or steps) in the cassette.
How do I know what kind of cassette I have?
A cassette may therefore be sized as 11-32t. The first number refers to the number of teeth on the smallest sprocket (the highest gear, for fast pedalling at speed) and the second number to the biggest sprocket (the lowest gear, for climbing hills).
Should I grease cassette hub?
Condensed answer: The cogs of a bike cassette do not require lubrication due to their structure and function. Lubricating them can cause harm by creating a sticky layer attracting dirt.
Is SRAM cassette tool same as Shimano?
Additionally I assume that the freewheel on the bike will be compatible for a SRAM or Shimano cassette? Yes, the tool is the same in either case.
Can I put a different cassette on my bike?
In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain. SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.
Can I put any cassette on my bike?
Yes, almost any bike is compatible with bigger cassettes, bike drivetrain is groupset of components that works in perfect harmony, any miss reconfiguring can break the perfect functionality of the system, parts that need to be changed and reconfigured when putting bigger cassette which is long-chain, wide cage …
How long should MTB cassette last?
Very Roughly: bike cassette can last between 4000 to 6000 miles, and some can last up to 10,000 miles, an equivalent of 3 to 4 chains, it depends on the quality of the cassette itself, maintenance, and riding conditions.
What tools do I need to change a Shimano cassette?
In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.