How do I clear the error code on my Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What is code F07?

motor control unit
The manufacturer has assigned this error or fault code to indicate that the machine has detected a short-circuit in the motor control unit circuit board.

What does the Code F mean on a Whirlpool washer?

An F error code usually means the washer will not work at all, and the control board will need to be replaced.

Is there a reset button on a Whirlpool washing machine?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

How do I fix F07 error?

The only thing you can do is try and reset the control by unplugging the washer or killing power to it at the breaker for a minute and restore power. If the F07 error persists after that then the motor control unit / MCU will need to be replaced.

What does F07 mean on washing machine?

F07 — Electronic circuit board fault / heating circuit fault. Issue: During a wash cycle the programme pauses part way through/ the machine is not heating and the pump runs continuously.

What does FD mean on a washing machine?

Factory Default
A Fd (Factory Default) error code indicates that the washer was set back to factory default settings. To return all options and modifiers to Factory Default, press POWER/CANCEL, select Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within 5 seconds.

How do I reset my Whirlpool washer that won’t spin?